Finding the Door Security Code for a Ford Explorer

If you’ve ever locked the keys inside a Ford Explorer XLT or Eddie Bauer, you know the benefit of having the door keypad to unlock it. What do you do if you’ve lost the code?

XLT and Eddie Bauer model Ford Explorers are equipped with a five-button key pad on the driver’s side door that may be used to gain entry to the vehicle or to manually lock all of the doors from that side in the event that the owner misplaces their keys or locks them in the vehicle.  This feature is great for those times when you’d otherwise be stranded outside the vehicle.

If you have forgotten the code, you do have the option to pay the dealer where you purchased the Explorer and they will provide the code, but the fee is significant.  You can find the code hidden inside the Explorer, so why pay for it?  The keypad is not helpful if your keys are locked inside and you don’t know the code, but if you still have access to the interior of the vehicle, you should be able to locate the code and memorize it or write it down.  You just have to know where to look.

Hmmm... what was that code?

Open the rear hatch of the Explorer.  Inside the drivers’ side of the storage area, there is an access panel where the jack is stored.  Open this panel by twisting the knob and completely remove the panel.  You may have to remove the jack from it’s holder to see the code.

Using a flashlight, look inside the panel in the direction of the front of the vehicle.  There is a label inside with the code typed on it.  You may have to look at odd angles to see it or use a mirror to get a better look.  Write down the code and then close and lock all the doors of the Explorer.  Try entering the code to unlock the doors.  Pressing the two buttons on the far right twice simultaneously should lock all the doors.  This quick lock function is a universal feature no matter what code is assigned to unlock the doors.  If for any reason the code does not work, consult the dealer.  They may have to reprogram the keypad, which will also cost you.

How to Fix the Center Console Armrest Cover in a 1995 - 2001 Ford Explorer

When the center console armrest cover in your second generation (1995-2001) Ford Explorer has become cracked and ugly from years of sun damage, don’t spend a lot of money replacing it.  With a little effort, you can restore it and make it look brand new for under ten dollars.

Things You’ll Need

Vinyl material of matching color and texture

Double-sided tape

Pencil or pen

Scissors

Phillips head screwdriver

Small flathead screwdriver

Step 1

Cut or tear off a piece of the damaged armrest cover.  Visit a piece goods store and find the upholstery section.  Show them the old material and ask them if they have anything similar in texture and color.  For my repair, I purchased a yard of marine grade vinyl, which is used to recover boat seats, for under $8.00.  In retrospect, a third of a yard should be plenty of material unless you are prone to accidents.

Step 2

Lift the armrest cover to expose the inside of the console storage compartment.  On the hinge in the back, you will see three Phillips head screws.  Remove all three and place them in a cup holder.  You won’t need these screws again until you re-install the armrest cover.

Step 3

Place the armrest cover with the bottom side facing up on a hard, flat surface.  Around the perimeter of the cover, you will see nine Phillips head screws.  Carefully remove each of these and place them in a safe location.  Remove the plastic panel to expose the interior of the armrest cover.  You should see a series of small staples that hold the vinyl material firmly in each of the corners.

Step 4

Very carefully pry these staples out of the plastic armrest base.  If the plastic base is old, it may have become brittle and you don’t want to crack it.  When all staples are removed, throw them away and remove the outer vinyl cover.  Inspect the underlying foam material.  If it looks OK, don’t worry about replacing it.

Step 5

Spread out the new vinyl material faced down on the flat surface and place the old vinyl material on top of it.  Stretch it out as much as you can and trace the outline onto the new material using a pencil or pen.  As long as you can recreate the basic shape of the original material, it should work.  Don’t worry if your new design is not as perfect as the original.  It would actually benefit you to add up to an inch along the longer sides.  Try to make the front and back of the new material match the original as closely as possible, though.  Don’t worry about cutting holes for the screws.  They will punch through the material when you screw them back in.

Step 6

Cut two inch-long pieces of double stick tape and apply them to the plastic base, just inside the rear section.  Lay the plastic base upside down on the new material and stretch the piece that corresponds to the back of the armrest so that it sticks to the tape.  Now, place two small pieces of tape inside the front of the base.  Lift the entire base and stretch the material towards the front.  When the material is as tight as you can get it, fold it firmly onto the tape.

Step 7

Flip the armrest right-side up and inspect your work so far.  Does it feel tight?  Are there any wrinkles?  If there is anything that doesn’t pass your inspection, remove the material and adjust it.  After the next step, it will be harder and more aggravating to fix earlier mistakes.

Step 8

Place the armrest upside-down again and apply pieces of tape just inside each corner.  Stretch and fold the corners of the material so that they overlap and contour the corner very tightly.  Fold each one so that they stick firmly to the tape.  When the corners are done, apply tape to the sides and repeat the procedure.

Step 9

Inspect the armrest cover once last time from above.  The material should be stretched tightly around the entire perimeter of the armrest.  The front corners should look round.  Make sure there isn’t any material sticking out that could interfere with the cover’s opening and closing.  If everything looks good, place the plastic panel back onto the underside of the cover and replace each Phillips screw.

Step 10

Take the newly-covered armrest back to the Explorer and replace the three Phillips screws that you left in the cup holder back into the hinge.  Open and close the armrest cover to make sure it has clearance on both sides.